| Customization: | Available |
|---|---|
| After-sales Service: | One Year |
| Warranty: | One Year |
Industry-leading Audited Factory
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
LDY Metallurgical Single Beam Bridge Crane is mainly used in metallurgical and casting places for lifting and transporting molten metal. Its supporting lifting mechanism is YH Metallurgical Electric Hoist, and the lifting weight is less than 10T. The bottom of the crane main beam adopts special heat insulation treatment. The working environment temperature is -10ºC ~ 60ºC, and the relative humidity does not exceed 50% at 40ºC. The design and manufacture of this crane conform to the standards of the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China. Other places for lifting molten non-metallic materials and lifting hot solid metals can also refer to the selection
This product has two operation methods, ground or operation room, with open model closed model, can be installed on the left or right side according to actual conditions.
| Crane travelling mechanism | Travelling Speed | 20 | 30 | |
| Speed ratio | 58.95 | 39.42 | ||
| Motor | Type | cone squirrel-cage | ||
| Power | 0.8×2,1.5×2 | |||
| Rotational speed | 1380 | |||
| Lifting mechanism(electric hoist)&electriic hoist travelling mechanism | Model of electric hoist | YH model | ||
| Lifting speed | 8,7 | |||
| Lifting height | 9,12,18,20 | |||
| Travelling | 20 | |||
| Motor | cone squirrel-cage model | |||
FAQ
Q1.Can the cranes be customized?
Yes,every customer's working condition is different, all of our products can be customized depend on customers' requirements.Please give us the information as clear as you can, so we can give our best design to suit for your demands.
Q2.How many operation methods for my selections?
We provide pendent controller with push button control type, remote control type or cabin control type.Please tell us what kind of operation way you need.
Q3.I have low headroom in my workshop, is it possible to install a crane in it?
We have special products for low headroom workshop, our engineer can give the best design according to your dimensions.
Q4.Do you supply lift tools?
Yes, we can provide any kind of lifting tools such as hook, electromagnetic, grab bucket etc...
Q5:In order to offer the most suitable design solution for you, it will be great helpful if you can offer us the following information to us:
1.Lifting capacity.
2.Span length.(rail center to rail center)
3.Lifting height.(hook center to ground)
4.Have you installed the rails?Do you need us to supply the rails?How long is it?5.Power supply:Voltage.
6.Working condition:What kind of material to lift?Temperature?
7.It would be much better if it is possible for you to offer the drawing photo of your workshop.
){kind=link}